Latest
news
Alright, geezer? 2.30 Kempton: Diamond Geezer wins by a length, Dodgy Geezer disqualified Mind how you go 3.15 Sandown: Having A Mare pulled up, Guv'nor evens fav Leave it out Dad's tip: hold records by the edges Dad's tip: check your tyre pressures once a month Dad's tip: ask a mate twice how he's doing Results: Fry-up 1, Diet 0
Total Geezer
DIY

Seven DIY jobs every geezer should be able to do (without ringing his dad)

Bleeding a radiator, putting up a shelf that stays up, unblocking a sink: the basic jobs that save you money, earn you respect and stop the other half sighing.

By Gaz Whitlock · 19 November 2026

Let's be honest. Every bloke has a drawer full of screws that don't fit anything, a drill he bought for one job in 2019 and at least one shelf that leans slightly to the left. No shame. But there are a few jobs every geezer should be able to do without googling in a panic or ringing his old man.

1. Bleed a radiator

Cold at the top, warm at the bottom? There's air in it. Heating off, radiator key on the little valve at the top, quarter turn, old tea towel underneath. When the hissing stops and water appears, close it. Done. Feel like a plumber for the rest of the day.

2. Put up a shelf that actually stays up

Use a spirit level (yes, really), find out what your wall is made of, and use the right plugs. Plasterboard needs special fixings. Most falling-down shelves aren't bad luck. They're the wrong plugs. And always check for pipes and cables before you drill: a cheap detector costs less than a new ceiling.

3. Unblock a sink

Before you reach for the chemicals, try a plunger, then undo the U-bend underneath (bucket first, trust us). What you find in there will haunt you, but you'll have saved yourself a call-out fee.

4. Change a fuse in a plug

Unplug it first, obviously. Check the rating the appliance needs and swap it. Anything more serious than a plug or a light bulb, and anything in the fuse box beyond flicking a switch back on, is a job for a qualified electrician. That's not being soft, that's being alive.

5. Re-seal a bath

Mouldy old sealant out, surface cleaned and dry, new sealant in one steady line. Top tip: fill the bath with water first so it settles to its real position before you seal it.

6. Fix a dripping tap

Usually it's a worn washer or cartridge. Water off at the isolation valve, take the tap apart, take the old bit to the shop and get a matching one. Twenty minutes and a bit of swearing.

7. Know when to call someone

The diamond geezer move is knowing your limits. Gas, proper electrics and anything structural are for the professionals. Your mate Dave who "did a bit of building once" doesn't count.

Got a DIY disaster story? We want to hear it. Send it in and we promise to laugh with you, not at you. Mostly.

Keep reading